A floor with varying wood characteristics and colors to include distinct color variations, numerous streaks, stained sapwood, sound knots, and checks. All defects must readily fill.

Will admit the following: sound tight knots, provided they do not occur on edges or ends of strips; slight imperfections in machining; distinct color variations; sticker stain/shadow; numerous dark green or black spots or streaks, provided they do not occur in combination with predominantly dark heartwood; slight checks not exceeding 3" in length (may be slightly open) and running parallel with and well inside the edges and ends of the strips; dark spots or streaks with slight checks in center; small rough spots (torn grain) which cannot be wholly removed by ordinary method of sanding the floor after it is laid; slightly torn edges; short tongue if sufficient to hold properly in the floor; shallow or waney back, if piece has sufficient bearing of full thickness to support it in the floor; small bark streaks where bark is as sound as surrounding wood; and slight variation in angle of end matching. The face shall be free of shake and wood must be sound.

Bundles shall be 1-1/4' to 8'. Not over 60% of the total footage shall be in bundles under 4', not more than 27% of the total footage shall be in 2' bundles; and not more than 15% of the footage shall be in 1-1/4' bundles.

(Natural Finish #1 Common Hard Maple)

(unfinished #1 Common Hard Maple)